Huawei ECC800 User Manual page 124

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Address
4
5
6
7
8
9
10
11
12
Step 4 Add the cabinet electronic clasp locks.
1.
2.
3.
Table 5-15 Adding an E-LOCK
Path
Choose System Settings >
Device Management and
click Add Device. The
parameters for adding
devices are displayed.
4.
5.
Issue 06 (2020-04-22)
Toggle
Switch 1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Log in to the ECC800-Pro WebUI as an administrator.
Create a cabinet view in Smart Module View on the home page.
Add a cabinet electronic clasp lock.
Click Test Connect to check whether the connection between the cabinet electronic
clasp lock and the ECC800-Pro is normal.
− If the connection is normal, click Confirm. The connected devices are displayed in
the Number of connected devices list.
− If the connection is abnormal, check whether the device is properly connected to the
ECC800-Pro, whether the device and ECC800-Pro are running properly, and
whether the parameter settings are consistent with the device parameters.
Connect the electronic locks of other cabinets.
Copyright © Huawei Technologies Co., Ltd.
Toggle Toggle
Switch 2 Switch 3
OFF ON
OFF ON
ON ON
ON ON
OFF OFF
OFF OFF
ON OFF
ON OFF
OFF ON
Parameter
Name
Device
attribute
Device type
Connect to
Communicatio
ns port
Device address
5 Power-On Commissioning
Toggle Toggle
Switch 4 Switch 5
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
Setting
Elock
E-LOCK
ECC800
odd-numbered cabinets: COM2
even-numbered cabinets: COM3
Enter the actual device address of the
cabinet electronic clasp lock.
Toggle
Switch 6
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
113