Specifications - Toro Workman 3000 Series Service Manual

Specifications

Item
Pump
Pump Capacity
Pump Relief Pressure (Vehicles with Hydraulic Lift Capabilities)
Pump Relief Pressure (Vehicles without Hydraulic Lift Capabilities)
Lift Control Valve (Vehicles with Hydraulic Lift Capabilities)
Remote Hydraulics Relief Pressure (Vehicles with Hydraulic Lift
Capabilities)
Power Steering Relief Pressure
Hydraulic Filter
Hydraulic Oil
Reservoir (Transaxle) (Fig. 1)
Figure 1
1. Dipstick
Hydraulic System
3.5 GPM (13.4 liter/min.) at 1,500 PSI (10,342 kPa) and 2,250 RPM
Three position control valve Spring return to neutral Ball checks to
Automotive spin–on cartridge type 10 micron with 25 PSI by–pass
1
Page 9 – 2 Rev. D
Description
Full bypass at 2,500 PSI (17,238 kPa)
Full bypass at 1,000 PSI (6,895 kPa)
maintain load
1,900 PSI (13,100 kPa)
1,000 PSI (6,895 kPa)
valve 100 mesh strainer in reservoir
Dexron IlI ATF
7.5 U.S. qt. ( 7.1 Liter) system capacity
Workman 3000/4000 Series