Toro Workman 3000 Series Service Manual page 289

29. Install differential gear assembly (Item 1) together
with fork shaft (Item 2) onto transaxle case.
30. Install side cover:
A. Insert 2 dowel pins onto transaxle case.
B. Apply silicone sealant onto mating surface of
side cover.
C. Install side cover. Tighten capscrews to a torque
of 24.5 – 29.5 Nm (18.5 – 22 ft–lb).
31. Install R.H. axle shaft assembly:
A. Apply silicone sealant onto mating surface of
seal cover.
B. Install axle shaft assembly (Item 2) and tighten
capscrews (Item 1) to a torque of 24.5 – 29.5 Nm
(18.5 – 22 ft–lb).
Workman 3000/4000 Series
1
2
Page 6 – 51
Figure 121
1
2
Figure 122
Figure 123
Figure 124
Drive Train