Fuses; Headlamp Replacement - Toro Workman 3000 Series Service Manual

Fuses

The fuse block is located under the right side of the dash
panel.
NOTE: It is not always possible to see if a fuse is faulty.
It is recommended that you check for faulty fuses with a
continuity tester, not visually.
FUSES
OPEN
LIGHTS & HORN
DASH
IGNITION
Figure 16

Headlamp Replacement

Assemble and disassemble headlamp as shown in il-
lustration.
NOTE: Bulb can be replaced without removing head-
lamp assembly. Be careful when replacing bulb. Never
touch bulb with fingers – handle by the base.
Workman 3000/4000 Series
––
15A
7.5A
7.5A
1. Bulb
2. Screw
Page 8 – 25
1
Figure 17
1. Fuse block
2
1
3
Figure 18
3. Lens
Electrical System (Rev. G)