Toro Workman 3000 Series Service Manual page 36

Minimum Recommended Maintenance Intervals
Maintenance Procedure
Check Battery Fluid Level
Check Battery Cable Connections
Check Dust Cup and Baffle
Lubricate All Grease Fittings
Inspect Condition and Wear of Tires
� Change Engine Oil and Filter
Inspect Cooling System Hoses
Check Governor Oil Level
� Check Cable Adjustments
�
Check Alternator, Governor and Fan Belts
Change Air Cleaner Filter
Check Engine RPM (Idle and Full Throttle)
�
Torque Wheel Lug Nuts
Check Front Wheel Alignment
Inspect Service and Parking Brakes
Inspect Fuel Lines
Replace Fuelock Filter
Adjust Valves
Replace Spark Plugs and Check Timing
�
Replace Transaxle Filter
Change Transaxle Oil
Clean Transaxle Strainer
Pack Front Wheel Bearings
� Initial break in at 10 hours
� Initial break in at 50 hours
Replace all Interlock Switches
Flush/Replace Coolant System Fluid
Change Brake Fluid
Replace Engine Timing Belt
(See Operator's and Service Manual for specifications an procedures)
Product Records and Maintenance
WORKMAN� 3420–LP Maintenance Schedule
Page 2 – 24 Rev. D
Maintenance Interval & Service
Every
Every
100hrs
50hrs
A Level
Service
B Level
Service
Annual Recommendations:
Replace switches, Coolant and Brake Fluid every
1200 hours or 2 years, whichever occurs first.
Replace Engine Timing Belt every 2000 hours or 2
years, whichever occurs first.
Every
Every
Every
800hrs
400hrs
200hrs
C Level
Service
D Level
Service
E Level
Service
Workman 3000/4000 Series