Parking Brake Adjustment; Front Wheel Toe-In - Toro Workman 3000 Series Service Manual

Parking Brake Adjustment

1. Loosen set screw securing knob to parking brake le-
ver.
2. Rotate knob until a force of 55 to 65 lbs. (25 to 29 kg)
is required to actuate lever.
3. Tighten set screw after making adjustment.
Front Wheel Toe–In
1. Measure center to center distance (at axle height) at
front and rear of steering tires. Front measurement must
be equal to the rear measurement + 1/8 in. (3 mm).
2. To adjust, loosen jam nuts at both ends of tie rod.
3. Rotate tie rod to move front of tires inward or outward.
4. Tighten tie rod jam nuts after making adjustment.
Workman 3000 Series
3
Page 7 – 5 Rev. D
2
1
Figure 4
1. Parking brake lever
2. Knob
3. Set screw
Center–to–center
Distance
Figure 5
1
Figure 6
1. Tie rod
Steering, Brakes and Supension