Adjustments
Brake Pedal Adjustment
1. Loosen jam nut on link rod ball joint.
2. Rotate rod until gap between brake pedal and up stop
is 0.020 to 0.080 inch (0.5 to 2 mm).
3. Tighten jam nut after making adjustment.
Worn or misadjusted brakes may result in
personal injury. If brake pedal travels to with
� (38 mm) of the vehicle floor board, the
1
in 1
/
2
brakes must be adjusted or repaired.
Steering, Brakes and Suspension
CAUTION
1
Page 7 – 4 Rev. D
Figure 2
1. Link rod ball joint
3
2
Figure 3
1. Brake pedal
2. Clutch pedal
3. Clutch pedal up stop
Workman 3000 Series
1