Toro Workman 3000 Series Service Manual page 293

P.T.O. Service
Figure 132
Power Take–Off (PTO) Disassembly
NOTE: Item numbers in figures are shown in order of dis ­
assembly; for example, remove Item 1 first, then Item 2,
etc. Reassemble in reverse order; for example, install
Item 1 last.
1. Thoroughly clean outside surface of PTO case.
2. Loosen capscrews and nut. Separate PTO cover from
PTO case.
Figure 133
Workman 3000/4000 Series Drive Train
Page 6 – 55