Servicing The Steering Head (Greenspro 1260) - Toro GreensPro 1240 Service Manual

Servicing the Steering Head (GreensPro 1260)

g240021
1. Flange-head screw
2. Hex nut
3. Flat washer (2 each)
4. Locknut
5. Steering head frame
Disassembling the Steering Head
Chassis: Service and Repairs
Front steering head assembly (GreensPro 1260)
6. Rubber pad (4 each)
7. Cap screw (4 each)
8. Flat washer (8 each)
9. Locknut (4 each)
10. Jam nut
Refer to Figure 87 for this procedure.
1. Remove the retaining ring and lift the roller support with ball joint from the
steering head frame.
Figure 87
11.
12.
13.
Page 7–48
Roller support
Ball joint
Retaining ring
GreensPro ™ 1240/1260
14211SL Rev A