GreensPro 1240 (continued)
Hydraulic System: General Information
Most of the traction control system components are attached to the bottom of
the chassis. The motion control pedals extend through the chassis, as does the
linkage rod that attaches to the transmission control arm. The transmission and
transmission drive components mount to the top of the chassis.
The GreensPro 1240 machines with serial number above 315000000 include
a parking brake system. The band style parking brake is hand actuated. The
system engages a brake hub mounted on the end of the drive roller axle. These
machines include a parking brake switch, operator's seat switch, and a neutral
switch as part of a safety interlock system; refer to
Page 5–4
Electrical System (page
GreensPro
™
1240/1260
14211SL Rev A
6–2).