Transmission (GreensPro 1240)
g241041
1.
Transmission
2.
Neutral switch
(serial number above 315000000)
3.
Damper
4.
Linkage rod
5.
Transmission control arm
Removing the Transmission
Hydraulic System: Service and Repairs
6.
Damper plate
7.
Lock washer
8.
Hex nut
9.
Bolt (2 each)
10.
Flat washer (4 each)
Refer to
Figure 32
for this procedure.
1. Park the machine on a clean, level surfaces, shut off the engine and engage
the parking brake if equipped, or remove the spark plug wire from the spark
plug.
2. Press the motion control pedals to release the pressure in the system.
3. Remove the transmission cover from the machine; refer to
Cover (page
7–58).
Figure 32
11.
12.
13.
Page 5–44
Spacer (linkage arm)
Spacer (damper plate)
Locknut (2 each)
Transmission
GreensPro
™
1240/1260
14211SL Rev A