Toro GreensPro 1240 Service Manual page 132

Adjusting the Steering Linkage (continued)
Chassis: Adjustments
g239306
1. Block
2. Steering pivot assembly
3. Steering pivot rod
B. Loosen the hex nuts of both steering head linkage arms. Turn the
steering head linkage arms until the front and rear steering head
rollers are aligned with each other to within 2 mm (0.08 inch). Place a
straightedge across the steering rollers to ensure that the steering rollers
are in alignment and adjust the steering head linkage arms as necessary
to achieve alignment
g240026
1. Straightedge
Figure 54
GreensPro 1240
4. Steering disc
5. Steering head linkage arm (2 each)
(Figure 55).
Figure 55
2. Steering roller
Page 7–6 GreensPro ™ 1240/1260
14211SL Rev A