Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
3
4
5
6
Media and Additional Parts
Description
Operator's Manual
Key
1
Checking Tire Air Pressure
No Parts Required
Procedure
Check the air pressure in the drive tires, and adjust
the pressure as needed; refer to
Tire Air Pressure (page
Note:
You do not adjust air pressure for the
semi-pneumatic caster tires.
2
Servicing the Engine Oil
No Parts Required
Procedure
The engine is shipped with oil; check the engine-oil
level and, if necessary, add oil to the specified level;
Description
No parts required
No parts required
No parts required
CE conversion kit, Part No. 135-7423
(optional kit—sold separately)
Checking the Drive
38).
Qty.
–
–
–
1
Qty.
1
Read before operating the machine.
2
Start the machine.
refer to
Engine-Oil Specifications (page 32)
Checking the Engine-Oil Level (page
3
Checking the Battery
Charge
No Parts Required
Procedure
The machine is shipped with a filled, lead-acid battery,
Check the charge of the battery and, if necessary,
charge it; refer to
9
Use
Check the battery charge.
Checking the transmission fluid.
Check the auxiliary hydraulic fluid level.
Install the CE conversion kit.
Use
32).
Charging the Battery (page
and
37).