Toro GreensPro 1240 Service Manual page 138

Auto Hitch Slide (continued)
Chassis: Adjustments
B. Release the auto hitch lever
fully released position. The auto hitch slide should contact the roll pin
stop before the lever contacts the tow bar. Adjust as necessary.
g239305
1. Tow bar
2. Roll pin stop
4. Tighten the hex nut against adjustable yoke, and tighten the bolt and locknut
that secure the lever rod to the adjustable yoke.
(Figure 62). The lever should remain in the
Figure 62
3. Auto hitch slide
4. Lever (released)
Page 7–12 GreensPro ™ 1240/1260
14211SL Rev A