Toro GreensPro 1240 Service Manual page 12

Think Safety First (continued)
Safety: Safety Instructions
•
Avoid injury to bystanders...
Always clear the area of bystanders before starting or testing powered
equipment.
•
Avoid injury due to projectiles...
Always clear the area of sticks, rocks or any other debris that could be
picked up and thrown by the powered equipment.
•
Avoid modifications...
Never alter or modify any part unless it is a factory approved procedure.
•
Avoid unsafe operation...
Always test the safety interlock system after making adjustments or
repairs on the machine. Refer to the Electrical section in this manual
for more information.
•
Avoid electrical shock...
– Never touch electrical wires or components while the engine is running.
They can be sources of shock.
– De-energize the system if you are having to do repairs.
– If testing electrical components ensure you are working in a dry
environment.
•
Hydraulic System precautions...
– Release all pressure in the hydraulic system before performing any work
on the system.
– Keep your body and hands away from pin-hole leaks or nozzles that eject
hydraulic fluid under high pressure. Do not use your hands to search for
leaks. Hydraulic fluid escaping under pressure can have sufficient force
to penetrate the skin and cause serious injury.
– Seek medical attention right away if hydraulic fluid gets in the skin.
•
Use personal protective equipment...
– Use appropriate personal protective equipment (PPE) for protecting
yourself from potential hazards in the environment in which you will work.
– Each process outlined in this manual may need different PPE to protect
the service person. Use the proper PPE for the task at hand.
•
Using tools...
– All tools should be in proper working order. Do not use tools that are
broken or in disrepair.
– Use the proper tool for the proper application.
•
Using lifts, hoists, and jacks...
– All lifts, hoists, and jacks should be used in accordance with the
manufacturer information.
– Inspect lifts, hoists, and jacks prior to use.
– Do not over load lifts, hoists, and jacks.
– Do not work under a suspended load.
– Ensure chock blocks are used on equipment that can move.
– Use lifts or jacks and jack stands that are rated to support the total weight
of the machine and any attachments.
– Do not rely on jacks to support the machine.
– If you are unfamiliar with any lifts, hoists or jacks, do not use them until
you know how to operate them correctly.
Page 1–4 GreensPro ™ 1240/1260
14211SL Rev A