Toro GreensPro 1240 Service Manual page 171

Removing the Steering Head (continued)
Installing the Steering Head
GreensPro ™ 1240/1260
14211SL Rev A
Use a suitable lifting device to safely raise and support the machine
to get access to the components under the chassis.
1. Remove the steering roller; refer to
7–41).
Be careful when removing or installing the spring. The spring is
under load and may cause personal injury.
2. Remove the tension spring.
3. Remove the steering head linkage/pivot rod(s) from the steering head.
4. Support the steering head assembly, remove the fasteners that secure the
roller support to the inner chassis plate, and remove the steering head
assembly.
Refer to Figure 84 or Figure 85
Use a suitable lifting device to safely raise and support the machine
to get access to the components under the chassis.
1. Support the steering head assembly and install the fasteners that secure the
roller support to the chassis.
2. Install the steering head linkage/pivot rod(s) to the steering head.
Be careful when removing or installing the spring. The spring is
under load and may cause personal injury.
3. Install the tension spring with the fasteners previously removed.
4. Install the steering roller; refer to
CAUTION
Removing the Steering Roller (page
CAUTION
for this procedure.
CAUTION
CAUTION
Installing the Steering Roller (page
Page 7–45
7–41).
Chassis: Service and Repairs