General Information
Electrical System
Electrical System: General Information
The Operator's Manual provides information regarding the operation, general
maintenance, and maintenance intervals for your GreensPro machine. Refer to
the Operator's Manual for additional information when servicing the machine.
Some of the electrical system components used on GreensPro machines
are part of the Honda engine. These components include the engine
O
/O
switch, ignition module, lighting coil, Oil Alert™ unit, and oil level
N
FF
switch. Service information for these components can be found in the Honda
Engine Service Manual. Contact your local Honda Engine Dealer or visit
http://engines.honda.com
Service information for the remainder of the electrical system components
used on GreensPro machines can be found in this chapter. The components
include the hour meter, worklight switch, and on machines above serial number
315000000, a seat switch, neutral switch, parking brake switch, resistor
assembly, and interlock module.
Before performing any welding on the machine, disconnect the wire
harness ground connector from the engine to prevent damage to
the machine electrical system.
for assistance.
IMPORTANT
Page 6–2
GreensPro
™
1240/1260
14211SL Rev A