Hydraulic Motor (Greenspro 1260) - Toro GreensPro 1240 Service Manual

Hydraulic Motor (GreensPro 1260)

g240365
1. Socket-head screw
2. Spring washer
3. Plain washer (5 each)
4. Hardened washer
5. Brake hub
6. Bolt (2 each)
7. Plain washer (6 each)
8. Spacer (2 each)
Removing the Hydraulic Motor and Drive Roller Assembly
GreensPro ™ 1240/1260
14211SL Rev A
GreensPro 1260
9. Bearing housing
10. Locknut (4 each)
11. Plain washer (8 each)
12. Bolt (4 each)
13. Carriage screw (2 each)
14. Wheel motor nut
15. Woodruff key
16. Hydraulic motor
The hydraulic motor and drive roller should be removed from machine as
an assembly. Once removed from the machine, the hydraulic motor can be
separated for service.
Refer to Figure 40 for this procedure.
Figure 40
17.
18.
19.
20.
21.
22.
23.
Page 5–55
Bolt (4 each)
Drive roller hub
Drive roller
Bearing
Shim (as required)
Nut (4 each)
Motor guard
Hydraulic System: Service and Repairs