Steering Rollers - Toro GreensPro 1240 Service Manual

Steering Rollers

Removing the Steering Roller
Installing the Steering Roller
GreensPro ™ 1240/1260
14211SL Rev A
g239522
1. Steering head frame
2. Roller assembly (short)
3. Roller assembly (long)
Refer to Figure 82 for this procedure.
Use a suitable lifting device to safely raise and support the machine
to get access to the components under the chassis.
1. Turn the steering wheel to the left or right if necessary to access the steering
roller bolts.
2. Remove the 2 bolts, 2 lock washers, and 2 flat washers and lower the
steering roller assembly from the steering head.
Refer to Figure 82 for this procedure.
1. Turn the steering wheel to the left or right if necessary to access the steering
roller mounting holes.
2. Secure the steering roller assembly to the steering head with the 2 bolts,
2 lock washers, and 2 flat washers.
Figure 82
Front steering head assembly shown
4. Bolt (2 each per roller)
5. Lock washer (2 each per roller)
6. Flat washer (2 each per roller)
CAUTION
Page 7–41 Chassis: Service and Repairs