Removing the Drive Roller (GreensPro 1260) (continued)
Installing the Drive Roller (GreensPro 1260)
GreensPro
™
1240/1260
14211SL Rev A
1. Remove the drive roller assembly; refer to
Drive Roller Assembly (page
2. Remove the hydraulic motor and drive hub from the drive roller.
Refer to
Figure 72
for this procedure.
1. Secure the hydraulic motor and drive hub to the drive roller.
2. Install the drive roller assembly;
Roller Assembly (page
Removing the Hydraulic Motor and
5–55).
Installing the Hydraulic Motor and Drive
5–56).
Page 7–27
Chassis: Service and Repairs