Toro GreensPro 1240 Service Manual page 120

Testing the Interlock Module (continued)
Electrical System: Testing the Electrical Components
4. Check the seat switch, parking brake switch, and neutral switch and their
circuit wiring for proper operation; refer to individual component testing
procedures.
5. Check the Honda electrical components (engine ON/OFF switch, oil
level switch, Oil Alert unit, and ignition module) and their circuit wiring
for proper operation; refer to
Drawings/Diagrams (page 6–3)
6. Check the engine lighting coil output; refer to the Honda Engine Service
Manual.
7. If the lighting coil output, all interlock switches, and the Honda electrical
components and their circuit wiring are operating correctly, the interlock
module may be damaged. Replace the interlock module if necessary.
8. After testing, apply a film of dielectric grease to the module terminals and
connect the machine wire harness connector to the interlock module.
Electrical Schematics and Wire Harness
and the Honda Engine Service Manual.
Page 6–16 GreensPro ™ 1240/1260
14211SL Rev A