Drive Roller (Greenspro 1260) - Toro GreensPro 1240 Service Manual

Drive Roller (GreensPro 1260)

g240365
1. Socket-head screw
2. Spring washer
3. Plain washer (5 each)
4. Hardened washer
5. Brake hub
6. Bolt (2 each)
7. Plain washer (6 each)
8. Spacer (2 each)
9. Bearing housing
Removing the Drive Roller (GreensPro 1260)
Chassis: Service and Repairs
10. Locknut (4 each)
11. Plain washer (8 each)
12. Bolt (2 each)
13. Carriage screw (2 each)
14. Bolt (2 each)
15. Chassis
16. Wheel motor nut
17. Woodruff key
18. Hydraulic motor
The hydraulic motor and drive roller should be removed from machine as an
assembly. Once removed from the machine, the drive roller can be separated for
service.
Refer to Figure 72 for this procedure.
Note: Disconnecting the hydraulic hoses from the drive motor may not be
necessary to remove the drive roller.
Figure 72
19.
20.
21.
22.
23.
24.
25.
Page 7–26
Bolt (4 each)
Drive roller hub
Drive roller
Bearing
Spacer
Nut (4 each)
Motor guard
GreensPro ™ 1240/1260
14211SL Rev A