Toro GreensPro 1240 Service Manual page 54

Hydraulic System (GreensPro 1240) (continued)
Hydraulic System: General Information
The hydraulic system of the GreensPro 1240 machines includes the
transmission, hydraulic tank, hydraulic fluid filter, and a series of hydraulic hoses
(Figure 12). If a component failure occurs in the transmission, unwanted material
and contamination from the damaged component will circulate throughout the
system. This contamination can damage other components in the system, so
remove the contamination to prevent additional component failure.
If a transmission failure occurs, disassemble the entire hydraulic system,
drain the hydraulic fluid, and clean all the components and hoses in the
hydraulic system. Replace the hydraulic fluid filter. Operating the machine
with contaminants in the hydraulic system could cause additional damage to
components of the hydraulic system.
Page 5–8 GreensPro ™ 1240/1260
14211SL Rev A