Adjusting Procedure for GreensPro 1260 (continued)
GreensPro
™
1240/1260
14211SL Rev A
g271901
1.
Traction cable
2.
Pedal rod pivot assembly
5. Start the engine and set the throttle to full engine speed.
6. If the drive roller does not rotate, shut off the engine and attach the traction
cable to the pedal rod pivot.
7. If the drive roller rotates, note the direction of drive roller rotation, then shut
off the engine and adjust the transmission control arm assembly as follows
(Figure
29):
A. Loosen the RTN (Return To Neutral) adjustment screw until the control
arm assembly can be rotated.
Figure 28
GreensPro 1260
3.
Jam nut (2 each)
4.
Pedal stop bolts (2 each)
Page 5–33
Hydraulic System: Adjustments