Transport Frame Operation
Chassis: General Information
g239312
Transport frame in lowered position (chassis raised)
1.
Auto hitch slide
2.
Tow bar
3.
Transport frame
4.
Damper
5.
Gas spring
The transport frame of the GreensPro machines is placed in the raised position
(chassis lowered) during machine operation, or in the lowered position (chassis
raised) when transporting the machine
Manual for additional information on raising and lowering the transport frame.
When moving the transport frame into the lowered (transport) position, a gas
spring and lift pedal are provided to help raise the chassis off the ground. The
assembly is held in the lowered position by a latch mechanism attached to the
transport frame near the tow bar. During transport, the tow bar includes an auto
hitch slide to lock the machine onto the tow vehicle.
A damper prevents the chassis from lowering too fast when moving the transport
frame into the raised position. The transport frame is held in the raised position
by a latch mechanism attached to the chassis.
Figure 52
6.
Chassis
7.
Latch (raised)
8.
Lift pedal
9.
Latch (lowered)
(Figure
Page 7–4
52). Refer to the Operator's
GreensPro
14211SL Rev A
™
1240/1260