Lan Parameters - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[830] LAN PARAMETERS

This MMC provides a mean to configure the Internet Protocol (IP) addressing of the MCP
card.
No Parameter
00 SYSTEM IP ADDR
01 SYSTEM GATEWAY
02 SYSTEM NET MASK
03 SYSTEM RESET
04 SYSTEM IP TYPE
05 SYS PUBLIC IP1
06 SYS PUBLIC IP2
07 SYS PUBLIC IP3
08 SYSTEM MAC ADDR
09 SYSTEM IP VERS
13 DATA SERVER IP
2-358
Specifies the IP address for the MCP card.
Specifies the designated gateway IP address used for contacting
IP devices beyond the local network subnet.
Specifies the IP subnet mask.
This parameter is used by the system to calculate the range of IP
devices (subnet) that are within 'direct reach' of the MCP. (without
having to go through the designated network IP gateway)
Prompt to reset system MCP when system IP address is changed.
This reset is same as FAST RESTART in MMC 811.
Specifies if the system will be routing data over a public or private
network.
The MCP will originate communications to IP phones and VoIP
connections outside the local network using this IP address.
Communications to/from this IP will require involvement of the MGI
card. The system identifies communications to/from this address
as 'public'. This allows devices, on remote networks/subnets, to
establish communications with the system, without exposing the
LAN. See 'SYSTEM IP TYPE'.
The MCP will originate communications to IP phones and VoIP
connections outside the local network using this IP address.
Communications to/from this IP will require involvement of the MGI
card. The system identifies communications to/from this address
as 'public'. This allows devices, on remote networks/subnets, to
establish communications with the system, without exposing the
LAN. See 'SYSTEM IP TYPE'.
The MCP will originate communications to IP phones and VoIP
connections outside the local network using this IP address.
Communications to/from this IP will require involvement of the MGI
card. The system identifies communications to/from this address
as 'public'. This allows devices, on remote networks/subnets, to
establish communications with the system, without exposing the
LAN. See 'SYSTEM IP TYPE'.
For reference, and cannot be changed. The unique hardware
(MAC) address of the MCP card.
Specify the system IP address is IPv4/Ipv6
(This option may not be available in certain OfficeServ models.)
IP address of Data Server
(This option may not be available in certain OfficeServ models.)
Description
© SAMSUNG Electronics Co., Ltd.