Tx Level And Gain - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[805] TX LEVEL AND GAIN

Allows the system administrator to set the base level of TX volume on phones. There are
eight levels that can be controlled by the Volume buttons on phones, and 10 controllable
levels in the system. This MMC allows the system administrator to classify any desired
eight levels within 11.
No Option
0 TX LEVEL CONTROL
1 MISC TSW GAIN
2 TSW GAIN
CONTROL
3 CID TYPE/LEVEL
When changing the MMC [805]
'MMC [805] TX LEVEL AND GAIN' should not be changed from the default levels
without the assistance of the local SAMSUNG distributor.
DEFAULT DATA
SOME OPTIONS DEPEND ON COUNTRY
ACTION
1) Press Transfer button and enter 805.
Display shows:
2) Press Volume button to make selection (0-3) and
press Right Soft button to move cursor.
2-324
Adjusts the transmitting sensitivity (max.: 9) Default values are:
INDEX: 0 1 2 3
LEVEL: 0 1 2 4
Adjusts the level of the internal music source of the MCP card or
the external music source of the MIS card (0~7, higher numbers
mean lower levels). Default value is 0.
(This option may not be available in certain OfficeServ models.)
Adjusts the tone sensitivity. There are 11 types of matrix
connections of the T-Switch that adjust the tone sensitivity.
If the gain value of each trunk channel is configured in MMC421,
this option is ignored.
Adjusts the CID type and TX/RX Gain
- TYPE: CID TYPE control. (BELLCORE/ETSI)
- RX LEVEL: TX gain control (0 – 20)
- TX LEVEL: RX gain control (-6 – 0)
- DOWNLOAD: download adjusted CID TYPE and TX/
TX gain to SP
Description
4 5 6 7
3 5 6 7
DISPLAY
TX LEVEL CONTROL
LEVEL 00
TX LEVEL CONTROL
LEVEL 11
© SAMSUNG Electronics Co., Ltd.