Card Pre-Install - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[806] CARD PRE-INSTALL

Allows the pre-programming of a card slot for a specific card type. A card inserted into a
system will not be recognized by the system until it is enabled using this MMC. Cards
installed using this MMC will not be assigned in the system numbering plan-you should
use MMC 724 to assign the desired directory numbers to extensions, trunks, ports or
miscellaneous functions.
When a card is removed and a different type card is inserted
If a card is removed and a different card is inserted, and this MMC is performed,
the memory associated with the previous card (e.g., key programming) will be
erased.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 806.
Display shows:
2) Enter cabinet number via dial keypad. (e.g., 1)
OR
Press Volume button to make selection and
press Right Soft button.
3) Enter slot number via dial keypad. (e.g., 6)
OR
Press Volume button to make selection and press
Right Soft button.
4) Dial 1 for YES to reset card or dial 0 for NO.
OR
Press Volume button to make selection and press
Right Soft button.
5) Dial 1 for YES to reset card or dial 0 for NO.
OR
Press Volume button to make selection and press
Right Soft button.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-326
DISPLAY
C:1–S:1
8 DLI8 DLI
C:1–S:1
8 DLI8 DLI
C:1–S:6
16 DLI16 DLI
C:1–S:6
RESET CARD ? NO
C:1–S:6
ARE YOU SURE?NO
© SAMSUNG Electronics Co., Ltd.