Gk Options; H.323 Gk Options - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[836] H.323 GK OPTIONS

Provides a means to set the H.323 gatekeeper parameters for an optional, external industry-
standard H.323 network gatekeeper, using Registration, Admissions and Status (RAS). The
settings apply system wide.
MMC [836]
This program may not be available in certain OfficeServ models.
When changing IP
When changing any IP address/value, listed below, three digits must be input for
each (octet) field. Example 192.168.1.10 input must be: 192 168 001 010
No Parameter
00 GK CONNECTION
01 GK REGISTERED
02 GK ROUTING
03 GK RAS TYPE
04 GK IP ADDRESS
05 ALTER GK IP ADDR
06 GK NAME
07 H.323 ID
08 E.164 ID
09 GK KEEP ALIVE
10 GK DOWN ROUTE
11 URQ REASON
MODE
2-376
Description
This enables the H.323 call to connect to a
gatekeeper.
Display the status of registration to the Gatekeeper.
This enables routing of calls through a gatekeeper.
Select if AUTO or MANUAL, depending on your
gatekeeper's capabilities.
This is the gatekeeper's IP address.
This provides an alternate gatekeeper address.
This is the alphanumeric identifier of the gatekeeper.
(Up to 16 characters.)
This is the H.323 identifier used by the MGI when
registering with the gatekeeper. (Up to 32
characters.)
This is the E.164 identifier used by the H.323 trunk
when registering with the gatekeeper. (Up to 16
digits long.)
This is the timer that the MGI uses to acknowledge
the presence of the gatekeeper. The range is
000~999 seconds.
This provides an alternate route if the primary
gatekeeper is down. Selections are PSTN or ALTER
GK.
Select ON or OFF for use of Un-register Request
RAS (URQ) messages.
Default
DISABLE
NO
DISABLE
AUTO
0.0.0.0
0.0.0.0
'Gatekeeper'
'OfficeServ'
1234
0 SEC
PSTN
ON
© SAMSUNG Electronics Co., Ltd.