Rate Calculation Table - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[747] RATE CALCULATION TABLE

The RATE CALCULATION TABLE is used to define the billing charges for each COST
RATE. These rate tables correlate with the Trunk Cost Rate and the Costing Dial Plan.
There are eight call costing rates. Each rate has the following data fields.
No
0 1ST DUR
(FIRST INTERVAL DURATION)
1 1ST COST
(FIRST INTERVAL COST)
2 2ND DUR
(SECOND INTERVAL DURATION)
3 2ND COST
(SECOND INTERVAL COST )
4 SURCHARGE
Currency values
Currency values (£ or €) depend on the setting for the USE EURO option
in MMC 210.
DEFAULT DATA
ALL COST RATES: NO DATA
ACTION
1) Press Transfer button and enter 747.
Display shows:
2) Dial COST RATE number 1-8. (e.g., 3)
OR
Press Volume button to select COST RATE and press
Right Soft button to move cursor.
2-294
Type
This is the amount of time at the beginning of each
call to which a fixed cost is applied. The range is 0-
999 seconds; e,g. 180 seconds (three minutes).
This is the cost for the first interval duration in £s
sterling or Euros. The range is 0 to 999; e.g., 345
(£3.45 or €3.45).
This is the duration of each billing increment after
the first interval has expired. The range is 0-999
seconds; e.g., 006 seconds (six seconds).
This is the cost for each billing increment, in £s
sterling or Euros, after the first interval has expired.
The range is 0-999; e.g., 100 (£1.00 or €1.00).
This is a one-time charge, in £s sterling or Euros,
that is applied to the call over and above the time
charges. The range is 0-999; e.g.,150 (£1.50 or
€1.50).
(£ or €)
Description
DISPLAY
COST RATE (1)
1ST DUR:000 SEC
COST RATE (3)
1ST DUR:000 SEC
© SAMSUNG Electronics Co., Ltd.