Trunk Gain - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[437] 16 TRUNK GAIN

Specifies TX/RX gain to be adjusted in trunk line calls.
CONDITIONS
None
DEFAULT DATA
TRK TYPE: 1
RX: 3 TX: 3
ACTION
1) Press the Transfer button and 437.
2) Enter a trunk phone number.
OR
Select a trunk line by pressing the Volume button and
move the cursor by pressing the Right Soft button.
OR
Specify all trunk lines by pressing the Message
button (DS-24SE) or the ANS/RLS button (DS-
4028E).
3) Enter a TRK TYPE number (1~4) and store the
number by pressing the Right Soft button.
4) Enter a RX GAIN number (1~4)
and store the number by pressing the Right Soft
button.
5) Enter a TX GAIN number (1~5)
and store the number by pressing the Right Soft
button.
6) Press the Transfer button to store the data and
complete the procedure or press the Speaker button to
store the data.
2-164
DISPLAY
[701] TRK TYPE: 1
RX:3 TX:3
[702] TRK TYPE: 1
RX:3 TX:3
[702] TRK TYPE:2
RX:3 TX:3
[702] TRK TYPE:2
RX:2 TX:3
[702] TRK TYPE:2
RX:2 TX:4
[702] TRK TYPE:2
RX:2 TX:4
© SAMSUNG Electronics Co., Ltd.