System Options - Samsung OfficeServ 7000 Series Programming Manual
Call server
Hide thumbs
Also See for OfficeServ 7000 Series:
- Programming manual (473 pages) ,
- User manual (193 pages) ,
- System administration manual (46 pages)
Table of Contents
Advertisement
CHAPTER 2. MMC Programming
[861] SYSTEM OPTIONS
Sets a number of system options.
No
0
AUTO UPDATE TIME
1
SYSTEM SPPED BIN
2
IDLE WHEN ENBLOC
3
2 LINE ENBLOCK
4
2 ZONE EXT PAGE
5
USE LB FOR PAGE
6
LP TRK TONE DISC
7
SPNET OVERLAP
8
SPNET CLI TABLE
9
E-LCR CLI TABLE
10
EXTERNAL BGM/MOH
11
LCP CABINET TYPE
12
MAX CHAIN FWDALL
2-432
Option
Sets enable (1) or disable (0) the system automatically time and
date update from ISDN call connection message. If sets enable,
when system receives ISDN call connection message, system
checks valid data of encapsulated time and date, and update
system time and date device.
Sets max 500 (0) or max 950 (1) for the maximum number of
system speed dial bin.
Decides the state of Large LCD Phone treated as idle or busy
when the user of Large LCD Phone is dialing in ENBLOCK
mode.
Decides the usage of ENBLOCK mode for 2 line LCD Phone with
navigation buttons.
Decides whether 2 Zone external paging is enabled or not.
(This option may not be available in certain OfficeServ models.)
Decides whether LB port of MISC card is used as ROP port or
not. (This option may not be available in certain OfficeServ
models.)
When this option is set to ON, loop trunk can be disconnected by
detecting busy tone.
Designate whether to operate as the OVERLAP Mode in case of
SPNET Dialing.
This is the option to display the designated CLI number instead
of the (NODE + extension number) in the CLIP table of the
MMC323 when the network call is received in the KB net.
This is the option to comply with the clip table in case of the E-
LCR Call.
Background music source can use internal source or external
source. In case of external source, music source can be
supported in MISC port. (This option may not be available in
certain OfficeServ models.)
The OfficeServ 7200 can also use the OfficeServ 7100 as a
expansion cabinet. This option can be shown in the OfficeServ
7200.
0: OS7200 CABINET
1: OS7100 CABINET
If ALL CALL FORWARD or BUSY FORWARD is set, it is
possible to designate how many hops can be supported.
Description
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
