Set H-Trk - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[432] SET H-TRK

This MMC is used to select the type of Signaling for each H- trunk.
There are three operation types available. (E & M, DID, R/D)
MMC [432]
This option may not be available in certain OfficeServ models.
DEFAULT DATA
E&M
ACTION
1) Press Transfer button and enter 432.
Display shows:
2) Enter desired trunk number. (e.g., 705)
OR
Press Volume button to make selection.
Press Right Soft button to move cursor.
OR
Select all trunks.
3) Press Volume button to select trunk type and press
Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
2-158
DISPLAY
[701] SET H-TRK
E&M
[705] SET H-TRK
E&M
[ALL] SET H-TRK
E&M
[705] SET H-TRK
DID
© SAMSUNG Electronics Co., Ltd.