Dial Numbering Plan - Samsung OfficeServ 7000 Series Programming Manual

[724] DIAL NUMBERING PLAN

This MMC allows the technician to change directory numbers for stations, trunks, station
groups, trunk groups and feature access codes. The system can be pre-programmed with
default 3- or 4-digit numbering for stations, station groups and trunk numbers depending
on the position of the DIP switches on the MCP card. There is an error message provided to
prevent the accidental duplication of a directory number or feature access code.
NO
00 STN NUMB.
01 TRK NUMB.
02 VMAA NUMB.
03 MISC NUMB.
04 MGI NUMB.
05 S0 NUMBER
06 MOBEX NUM
07 GROUP NUMBER
08 FEATURE NUMBER
09 NETWORK NUMBER
© SAMSUNG Electronics Co., Ltd.
Type of Dial No
This is where station directory numbers are changed or
assigned
This is where trunk directory numbers are changed or
assigned.
This is where VM/AA directory numbers are changed or
assigned.
This is where directory numbers for relays, MOH ports
and the alarm sensor are changed or assigned.
This is where MGI port directory numbers are changed or
assigned.
This is where directory numbers for BRI station ports are
changed or assigned. (This option may not be available in
certain OfficeServ models.)
This is where MOBEX directory numbers are changed or
assigned.
This is where station or trunk group numbers are changed
or assigned.
This is where feature access codes are changed or
assigned. Dialing codes are entered via the dial keypad
by pressing a number the required number of times to
select the feature. For example, for OHVA, the number 6
would be pressed three times.
Please remember that this program is system-wide.
This is where additional LCR access codes are entered if
two or more OfficeServ 7000 Series systems are
networked together.
- LCR-xx: This codes will be translated by NTWK LCR
- RSXXXX: This codes will be translated by REMOTE
OfficeServ 7000 Series Call Server Programming Manual
Description
DGT table in MMC824
STN table in MMC868
2-261