Samsung OfficeServ 7000 Series Programming Manual page 295

Feature
VMMSG
VMSCMT
VMSMSG
VMSOUT
VMSREC
VMSVAC
VT
WAKEUP
XCHIN
DEFAULT DATA
For phones, buttons 1 and 2 are set as CALL buttons by default. (Other settings depend on
the keyset type.) For AOMs, all buttons are set as DSS buttons by default.
ACTION
1) Press Transfer button and enter 722.
Display shows:
2) Enter selected station number. (e.g., 205)
OR
Press Volume button to select station and press Right
Soft button to move cursor.
3) Enter selected key number. (e.g., 18)
OR
Press Volume button to select key number and press
Right Soft button to move cursor.
4) Using table above, press dial keypad to select
number.
OR
Press Volume button to make selection and press
Right Soft button to advance cursor to step 5 to enter
extender, if required, or to return to step 2.
© SAMSUNG Electronics Co., Ltd.
VOICE MAIL MESSAGE KEY (Requires SVMi card)
VMS COMMENT (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMS MESSAGE (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMS OUT CALL (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMS RECORD (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMS VACANT (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VOICEMAIL TRANSFER
WAKE UP (Hotel Feature)
EXPRESS CHECK IN (Hotel Feature)
OfficeServ 7000 Series Call Server Programming Manual
Description
DISPLAY
[201] KEY (MAST)
01:CALL1
[205] KEY (MAST)
01:CALL1
[201] KEY (MAST)
18:NONE_
[201] KEY PROG.
18:NONE (GPIK_
(Continued)
2-257