Trunk Status Read - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[409] TRUNK STATUS READ

This is a READ-ONLY MMC. Allows the status of trunks to be read in a format that will
enable the servicing personnel to quickly identify the ownership and position of a trunk.
No
00 PORT
01 TYPE
02 1A2 EMULATE
03 TRK FORWARD
04 LINE
05 DIAL
06-11 TOLL TYPE 1-6
12-17 RING PLAN 1-6
18 MOH SOURCE
19 DISA LINE
DEFAULT DATA
FOLLOWS TRUNK
ACTION
1) Press Transfer button and enter 409.
Display shows:
2) Enter trunk number via dial keypad. (e.g., 704)
OR
Press Volume button to make selection and press
Right Soft button to advance cursor.
3) Enter desired option 00-19. (e.g., 01)
OR
Press Volume button to make selection.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-124
Type
Port Number (Cabinet/Slot/Port)
LOOP, GND, E&M, DID, BRI, PRI, VOIP
1A2 Emulation On/Off
Trunk Forward On/Off
CO/PBX
DTFM/Dial Pulse
Ring Plan Toll Restriction (1-6)
Ring Plan Ring Destination (1-6)
MOH Source
DISA Status
Description
DISPLAY
[701] TRK STATUS
PORT:C1-S5-P01
[704] TRK STATUS
PORT:C1-S5-P04
[704] TRK STATUS
TYPE:LOOP TRUNK
© SAMSUNG Electronics Co., Ltd.