OfficeServ 7100
TECHNICAL MANUAL
7.1.11 Connecting a Wireless LAN Access Point
Wireless LAN service offered by the OfficeServ 7100 system requires the following equipment:
1. SMT-R2000: Wireless LAN Access Point (AP)
2. SMT-W5100E: Wireless LAN IP Phone
Maximum Number of Users
Number of Simultaneous Users
REFERENCES: For information on how to install and use SMT-R2000 and SMT-W5100E,
refer to Wireless Documentation.
Connect 4SWM board and SMT-R2000 WAN port by using RJ-45 Ethernet cable (100m
maximum distance). SMT-R2000 does not need to connect to additional power because it can
get power through 4SWM which supports PoE.
SMT-R2000 AP
Wireless Handset
Item
Table 7.2 Specification for Wireless LAN Connection
Figure 7.20 Connecting Access Point to Ethernet Port
7.22
Home Page
OfficeServ 7100 System (Basic Cabinet)
24
MMC 845 Setting
MP10/MP10a
Table of Contents
INSTALLATION
PART 7 MAY 2010