Samsung OfficeServ 7000 Series Programming Manual page 420

Call server
Hide thumbs Also See for OfficeServ 7000 Series:
Table of Contents

Advertisement

CHAPTER 2. MMC Programming
No
Parameter
15
SESSION
TIMER
16
SESSION EXP
17
TRK REG EXP
18
ALIVE NOTI
19
NOTIFY TIME
20
EXCLUSIVE
21
IMS OPTION
22
ASSERTED ID
23
PRIVACY
24
SIP PEERING
2-382
Description
This is the timer value which is used when exchanging
the message periodically to maintain the session if one
session is set. Whether to use the session timer is
determined according to each SIP server. Using the
default value is recommended.
Indicates the Expire Time in Session Timer. In general,
the value given by the SIP server is used. Using the
default value is recommended.
The Expire Time exists in periodical registration to the
SIP server. In general, the value given by the SIP server
is used. Using the default value is recommended.
Some SIP Servers require SIP UA to send OPTIONS
method simply for link test purpose. When set, system
sends OPTIONS message to the SIP Server.
When ALIVE NOTI is set, NOTIFY TIME decides the
message sending time interval.
When Set to Enable, system will only respond specifically
to the enabled SIP server. It will ignore all other SIP
messages not from the specified SIP server.
When enabled, SIP headers that are commonly used in
IMS environment will automatically be applied.
If the value is set to PRIMARY, outbound message's
FROM header will contain individual station number and
P-Asserted-Identity header will contain primary number
which is assigned by the SIP server.
If the value is set to ALTERNATE, outbound message's
P-Asserted-Identity header will contain individual station
number and FROM header will contain primary number
which is assigned by the SIP server.
When set, FROM header in outbound SIP message will
have user name of 'Anonymous' which hides caller
information. In this case, representative number instead
will be put into P-Asserted-ID header.
In general cases when making the call by interworking
with the SIP server, the SIP Server IP is used in the
From/To Header, however this is the option used when to
use its own IP of the terminal in case of a specific SIP
server.
(Continued)
Default
NONE
1800 sec
1800 sec
NONE
1800 sec
Disable
Disable
NONE
Disable
DISABLE
© SAMSUNG Electronics Co., Ltd.

Advertisement

Table of Contents
loading

Table of Contents