Assign Speed Block - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[606] ASSIGN SPEED BLOCK

Provides a means of adding or deleting speed dial blocks to the system or an individual
phone. With the ability to delete a block or blocks of speed dial, it will not be necessary to
waste these on such items as voice mail, DPIMs (Door Phone Interface Modules) or
stations that do not require the ability to use speed dial. The Free List will show how many
bins are left to be assigned.
The system list can have up to 500 numbers (or 950 numbers if set in MMC 861 SYSTEM
OPTIONS) and each station can have up to 50 numbers. Speed dial numbers are assigned
in blocks of 10. Each speed number may contain up to 24 digits.
DEFAULT DATA
SYSTEM: 200 ENTRIES
STATIONS: 1 BLOCK ASSIGNED
ACTION
1) Press Transfer button and enter 606.
Display shows:
2) Press Right Soft button to advance to next line.
OR
You can view BUSY LIST using Volume button.
3) Make a selection of SYSTEM or EXT using Volume
button and press Right Soft button to advance cursor.
4) Enter desired extension number via dial keypad.
(e.g., 205)
OR
Press Volume button to make selection and press
Right Soft button to advance cursor.
5) Enter valid number for bins.
(e.g., 0-5 for EXT or 00-50 for SYSTEM)
OR
Press Volume button to make selection.
OR
Press Hold button to delete bin (s).
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-204
DISPLAY
FREE LIST:20
SYSTEM:20
FREE LIST:20
SYSTEM:20
BUSY LIST:180
SYSTEM:20
FREE LIST:20
EXT201:1
FREE LIST:20
EXT205:1
FREE LIST:20
EXT205:5
© SAMSUNG Electronics Co., Ltd.