Samsung OfficeServ 7000 Series Programming Manual page 457

No Code
128 MNF38
129 MNF39
130 MNF40
MNF41
MNF42
- MNG--
89 MNG01
90 MNG02
91 MNG03
92 MNG04
93 MNG05
94 MNG06
DEFAULT DATA
ALL OFF
ACTION
1) Press Transfer button and enter 852.
Display shows:
2) Enter desired Alarm Display number. (e.g., 64)
OR
Press Volume buttons to select desired option and
press Right Soft button to advance the cursor.
3) To select if the alarm is active, press 1 for YES and 0
for NO.
An entry will return the cursor to step 2.
OR
Press Volume buttons to make selection and press
Right Soft button to save and return to step 2.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Alarm Name
Card Active Card Active notification
MEDIA CARD IN MEDIA CARD IN
MEDIA CARD MEDIA CARD OUT with dismount
OUT
SYS FAN Stop System FAN Stop alarm
SYS FAN Run System FAN Run alarm
Minor Error Minor Fault without Alarm Buffer saving
Phone Indicates the Phone is disconnected.
Disconnect Alarm Data = Tel number or Cx-Syy-Pzz
Phone Connect Indicates the Phone is connected.
Alarm Data = Tel number or Cx-Syy-Pzz
Off Hook Alarm Indicates Extension Off Hook Alarm timer has expired.
Alarm Data = Tel number or Cx-Syy-Pzz
On Hook Indicates the Off Hook Alarm Extension is on hook.
Alarm Data = Tel number or Cx-Syy-Pzz
MGI Packet Loss Indicates the MGI connection RTP packet loss is more
than 10 %.
Alarm Data = Tel number or Cx-Syy-Pzz
MGI Packet Delay Indicates the MGI connection RTP packet delay is more
than 500 ms.
Alarm Data = Tel number or Cx-Syy-Pzz
(Continued)
Definition
DISPLAY
01:MJA01 ACT:OFF
POR Restart
64:MNF01 ACT:OFF
Card Out
64:MNF01 ACT:ON
Card Out
2-419