Hot Line/Off Hook Selection - Samsung OfficeServ 7000 Series Programming Manual

[306] HOT LINE/OFF HOOK SELECTION

Allows a station to make a predetermined call, similar to a ring-down circuit, upon the
expiration of a timer. (see MMC 502, STATION TIMERS, Off-Hook Selection Timer)
CONDITIONS

The hotline destination can be a station, a station group, a trunk, a trunk group or an
external number.

There is a maximum of 18 digits in the dial string for external numbers. The access
code for trunk or trunk group access (e.g., 0 or 9) is not counted as part of the 18.
DEFAULT DATA
NONE
PROGRAM BUTTONS
B Used to insert a flash code 'F'
C Used to insert a pause code 'P'
D Used to insert a pulse/tone conversion code 'C'
E Used to mask/unmask following digits-shows as '[' or ']'
ACTION
1) Press Transfer button and enter 306.
Display shows.
2) Dial station number.
OR
Use Volume button to scroll through stations.
Press Right Soft button to move the cursor.
3) Enter the hot line destination of a station or trunk ID
(e.g., 9 or 701) with a maximum of 18 outgoing digits
after the access code for the CO call. (see above list of
options if needed)
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 502
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
STATION-WIDE TIMERS (OFF-HOOK SELECTION TIMER)
DISPLAY
[201] HOT LINE
NONE
[205] HOT LINE
NONE
[205] HOT LINE
9-1305P4264100_
2-89