Samsung OfficeServ 7000 Series Programming Manual page 453

No Code
26 MJB01
27 MJB02
31 MJB06
32 MJB07
- MJC--
35 MJC01
36 MJC02
37 MJC03
40 MJC06
41 MJC07
42 MJC08
43 MJC09
MJC18
MJC19
MJC20
MJC21
- MJD--
52 MJD01
53 MJD02
54 MJD03
55 MJD04
56 MJD05
57 MJD06
58 MJD07
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Alarm Name
HDLC Comm Error Communications to LCP lost or faulty.
Memory Alarm 1 A RAM diagnostic check error has occurred in the MP
card.
IPC MSGQ Over IPC TX queue full error has occurred in the MP card.
Alarm data = IPC Queue type
IPC MSGQ Under IPC TX queue full recovery has occurred in the MCP2.
Alarm data=IPC Queue type
DSP Error System Resource Fault
DTMF Fault An abnormal interrupt has occurred in the system
DTMF resources.
Alarm data=DTMF Receiver DSP position
Tone Fault An abnormal interrupt has occurred in the system
tone resources.
Alarm data=TONE Receiver DSP position.
CID DSP Fault CID DSP Fault
AC Pwr Loss AC Power Loss
AC Pwr Recovery AC Power Recovery
Low Battery Low Battery
Low Battery Rec Low Battery Recovery
D-BD Init Fault D-board Initial Fault
D-BD Init Rec D-board Initial Recovery
Card Init Fault Card Initial Fault
Card Init Rec Card Initial Recovery
DTRK Error ISDN or E1 card Fault
Sync Failure Clocking on TEPRI cards has become asynchronous.
Sync Recovery Clocking on TEPRI cards has become synchronous.
Red Alarm Locally detected loss of PCM carrier on TEPRI card for
more than 250 ms.
Alarm Data=Cabinet, Slot (Cx-Syy)
Red Alarm Rec PCM carrier detected locally on TEPRI cards.
Alarm Data=Cabinet, Slot (Cx-Syy)
Yellow Alarm Remotely detected failure transmitted in frame on
TEPRI card.
Alarm Data=Cabinet, Slot (Cx-Syy)
Yellow Alarm Rec Remotely detected failure restored transmitted on
TEPRI card.
Alarm Data=Cabinet, Slot (Cx-Syy)
Blue Alarm All 1's being transmitted on facility on TEPRI card.
Alarm Data=Cabinet, Slot (Cx-Syy)
(Continued)
Definition
2-415