Ring Group - Samsung OfficeServ 7000 Series Programming Manual

[329] RING GROUP

Up to five stations shall be able to be assigned to a ring group. When a master station is
ringing, the member stations of its ring group shall also be ringing simultaneously.
If a master station can not be ringing because the forward, DND, or Lock function etc. is
enabled, its member stations shall also not be ringing. However, if the master station is
unplugged, its member stations shall be ringing.
If an off hook ring occurs a master station due to a camp-on call which came in while it
was busy, its member stations shall also be ringing. If no off hook ring is ringing, they shall
not be ringing either.
If the forward all, DND, or Lock function is enabled in a member station, it shall not be
ringing. However, if the forward busy or no answer function is enabled, this setting shall be
ignored.
When a master or one of its member stations answers a call, other rings shall be cleared.
MMC [329]
MOBEX extension number cannot be assigned to Master of ring group.
ACTION
1) Press the Transfer button and 329.
2) Enter a desired station number
OR
Press the Volume button to select a desired phone
number and press the Right soft button to move the
cursor.
3) Enter the number of a desired member station
OR
Select the number of a desired service by using the
Volume button and move the cursor by using the
Right Soft button.
4) Press the Transfer button to complete the procedure
or press the Speaker button to store the data.
RELATED ITEMS
Program 857
Program 724
Program 328
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Set virtual cabinet of MOBEX
Set number plan of MOBEX
Set MOBEX number
DISPLAY
[2080]RING GROUP
MEMBER 1: NONE
[2080]RING GROUP
MEMBER 1: NONE
[2080]RING GROUP
MEMBER 1: 3001
2-111