Initialize Port - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[890] INITIALIZE PORT

This MMC clears a call process or initializes the database for specific station or trunks.
This will return the port to default condition.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 890.
Display shows:
2) Enter the station or Trunk line.
OR
Press Volume button to make selection and press the
Right Soft button to move cursor.
3) Enter 0 to call clear only or 1 to initialize port.
OR
Press Volume button to make selection and press the
Right Soft button to move cursor.
4) Enter 1 for YES or 0 for NO.
OR
Press Volume button to make selection and press the
Right Soft button to save and return to step 2.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
2-442
DISPLAY
[201] CALL CLEAR
ARE YOU SURE?NO
[202] CALL CLEAR
ARE YOU SURE?NO
[202] DB INITIAL
ARE YOU SURE?NO
[202] DB INITIAL
ARE YOU SURE?YES
© SAMSUNG Electronics Co., Ltd.