Disa Password - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[764] DISA PASSWORD

This is the program to enable the DISA incoming call without entering the DISA password
according to the CLI number of the incoming call to the DISA trunk line.
It is available to designate 500 CLI numbers, and if the DISA call is received to the CLI
number corresponding to the entered CLI number, it is available to make a call without
entering the password although the MMC210 DISA PSWD is designated as ON.
CONDITIONS
None
DEFAULT DATA
None
ACTION
1) Press the Transfer button and the 764.
2) Enter the table number ([001]-[500]).
Otherwise, select the table number by the Volume
button.
Move the cursor by pressing the Right soft button.
3) Enter the CLI number within maximum 16 digits,
and move the cursor by pressing the Right soft
button.
4) Press the Transfer button to complete the procedure
or press the Speaker button to store the data.
RELATED ITEMS
Program 210
Program 410
2-316
Designate the system On/Off.
Extension DISA service
DISPLAY
DISA PASS (001)
CLI:
DISA PASS (001)
CLI:
DISA PASS (001)
CLI: 1234
© SAMSUNG Electronics Co., Ltd.