Samsung OfficeServ 7000 Series Programming Manual page 166

CHAPTER 2. MMC Programming
CONDITIONS
An E1 card must be installed in the system, otherwise the message 'NO E1 TRUNK
CARD' is displayed.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 411.
Display shows:
2) Enter desired trunk number. (e.g., 705)
OR
Press Volume button to make selection.
Press Right Soft button to move cursor.
OR
Select all trunks.
3) Press Volume button to select trunk type and press
Right Soft button to move cursor.
4) Press Volume button to Signaling select and press
Right Soft button to move cursor.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
TRUNK PROGRAMMING
MMC 400
MMC 401
MMC 402
MMC 403
MMC 404
MMC 405
MMC 406
MMC 407
MMC 408
MMC 409
MMC 410
MMC 411
2-128
CUSTOMER ON/OFF PER TRUNK
TRUNK LINE/PBX LINE
TRUNK DIAL TYPE
TRUNK TOLL CLASS
TRUNK NAME
TRUNK CO TEL NUMBER
TRUNK RING ASSIGNMENT
FORCED TRUNK RELEASE
ASSIGN TRUNK MOH SOURCE
TRUNK STATUS READ
ASSIGN DISA TRUNK
ASSIGN E1 SIGNAL TYPE
DISPLAY
[701] E1 SIGNAL
UNUSE
[705] E1 SIGNAL
UNUSE
[ALL] E1 SIGNAL
?
[705] E1 SIGNAL
E&M:IMMEDIATE
[705] E1 SIGNAL
E&M:ITU_WINK
© SAMSUNG Electronics Co., Ltd.