Change Technician Passcode - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[801] CHANGE TECHNICIAN PASSCODE

Used to change the passcode which allows access to MMC 800, Enable Technician
Program, from its current value.
CONDITIONS
The passcode is four characters long. Each character can be digits 0-9. The current or old
passcode is required for this MMC.
DEFAULT DATA
DEFAULT PASSCODE: 4321
ACTION
1) Press Transfer button and enter 801.
2) Enter new passcode.
3) Enter new passcode again.
4) If passcode is correct, press Right Soft key to
continue and enter desired MMC.
If passcode is incorrect.
System returns to step 2.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 800
2-318
ENABLE TECHNICIAN PROGRAM
DISPLAY
TECH. PASSCODE
NEW CODE:_
TECH. PASSCODE
NEW CODE:∗∗∗∗
TECH. PASSCODE
VERIFY :∗∗∗∗
TECH. PASSCODE
VERIFY :SUCCESS
TECH. PASSCODE
VERIFY :FAILURE
TECH. PASSCODE
NEW CODE:∗∗∗∗
© SAMSUNG Electronics Co., Ltd.