Lcr Route Table - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[712] LCR ROUTE TABLE

The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the
completion of an outward bound call. This table works in conjunction with LCR DIGIT
TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE.
After you dial a valid digit string, the system uses the LCR ROUTE TABLE to select a
specific predetermined trunk group. There is a maximum of 99 routes available.
If more than one trunk group is available for call completion, the system uses the first
designated trunk group and then the succeeding trunk groups. If all trunk groups are busy
in a selected route, call queue becomes active and allocates trunks as they become available.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 712.
Display shows:
2) Dial LCR ROUTE table number. (e.g., 05)
OR
Press Volume button to selected table and press Right
Soft button to move cursor.
3) Dial TIME BAND index number 1-4. (e.g., 2)
OR
Press Volume button to selected index and press Right
Soft button to move cursor.
4) Dial LCR COS number 1-8. (e.g., 4)
OR
Press Volume button to selected COS and press Right
Soft button to move cursor.
5) Dial TRUNK GROUP access code. (e.g., 801)
OR
Press Volume button to selected access code and press
Right Soft button to move cursor.
2-238
DISPLAY
LCR ROUTE (01:1)
C:1 G:NONE M:---
LCR ROUTE (05:1)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:801 M:---
© SAMSUNG Electronics Co., Ltd.