Samsung OfficeServ 7000 Series Programming Manual page 184
Call server
Hide thumbs
Also See for OfficeServ 7000 Series:
- Programming manual (473 pages) ,
- User manual (193 pages) ,
- System administration manual (46 pages)
Table of Contents
Advertisement
CHAPTER 2. MMC Programming
CONDITIONS
Before setting the PRI program, the J2 jumper of the TEPRI or TEPRI2 card must be
set to 'ON' for PRI mode.
After changing this program, run MMC 418, BRI AND PRI CARD RESTART, to
apply the new setting.
DEFAULT DATA
CHANNEL ANY: YES
PRI MODE: DDI
DLSEND: OVERLAP
CLIP TABLE: 1
NB TYPE: UNKNOWN
NB PLAN: ISDN
CLIR w NUMB: OFF
ECT SERVICE: OFF
EFWD REROUT: OFF
SAME CONNID: OFF
CD PLAN: UNKNOWN
CD TYPE: UNKNOWN
TIME SYNC: OFF
DIVERT: OFF
CENTREX: OFF
ACTION
1) Press Transfer button and enter 420.
Display shows:
2) Dial first PRI trunk number in PRI card. (e.g., 730)
OR
Press Volume button to make selection and press
Right Soft button.
3) Enter option number.
OR
Press Volume button to select option.
4) Press Volume button to make selection.
Then press Right Soft button.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-146
DISPLAY
[701] PRI OPTION
CHANNEL ANY:YES
[730] PRI OPTION
CHANNEL ANY:YES
[730] PRI OPTION
PRI MODE:DDI
[730] PRI OPTION
PRI MODE:NORMAL
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
