Samsung OfficeServ 7000 Series Programming Manual page 397

No Parameter
14 IP-UMS SERVER
15 IP-UMS PORT
16 IP-IVR SERVER
17 IP-IVR PORT
18 MASTER/SLAVE IP
19 MMS PORT
21 NMS TRAP SERVER
22 CTI SERVER ADDR
25 NEWS ADDRESS
26 EMAIL SERVER
27 MMS SERVER ADDR
28 MMS WEB SERVER
29 IMPS SERVER ADDR
30 QoS CHECK
SERVER
LAN PARAMETERS
- The first three parameters: SYSTEM IP ADDR, SYSTEM GATEWAY, and
- When changing any IP address/value, three digits must be entered for each
CONDITIONS

This MMC must be used if there are ITP phones and/or MGI cards on the system.

After changing LAN parameters, restart the system to apply the new settings.
© SAMSUNG Electronics Co., Ltd.
Specify an IP UMS SERVER IP address.
(This option may not be available in certain OfficeServ models.)
Specify an IP UMS SERVER port.
(This option may not be available in certain OfficeServ models.)
Specify an IP IVR SERVER IP address.
(This option may not be available in certain OfficeServ models.)
Specify an IP IVR SERVER port.
(This option may not be available in certain OfficeServ models.)
Specify an Slave (extension Rack) IP address in OS7030.
(This option may not be available in certain OfficeServ models.)
IP address of NMS TRAP Server
(This option may not be available in certain OfficeServ models.)
IP address of NMS TRAP Server
(This option may not be available in certain OfficeServ models.)
IP address of CTI Server
IP address of News Server
Specify an EMAIL SERVER IP address.
(This option may not be available in certain OfficeServ models.)
Specify an MMS SERVER IP address.
(This option may not be available in certain OfficeServ models.)
Specify an MMS WEB SERVER IP address.
(This option may not be available in certain OfficeServ models.)
Specify an IMPS SER SERVER IP address.
(This option may not be available in certain OfficeServ models.)
Specify a QoS CHECK SERVER IP address.
(This option may not be available in certain OfficeServ models.)
SYSTEM NET MASK are stored separately from the main system database
and thus will not be defaulted when MMC811 'CLEAR MEMORY' is performed.
Furthermore, any changes to these parameters will not be applied until the MP
card is reset.
(octet) field. For example 192.168.1.10 should be entered as: 192 168 001 010.
OfficeServ 7000 Series Call Server Programming Manual
Description
(Continued)
2-359